
Fujikura fsm-80S Fusion Splicer With CT-30A Cleaver
The FSM80S was introduced in 2013. This is the KIT version.
Today, explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicer. Fujikura FSM-70S and FSM-80S splicers are the new standard model to cover varied splicing needs in those fields.
Main features:
(Those features maximize productivity and operatability in splicing at the field.)
- Automated Wind-protector / Tube Heater
- Reduced splicing steps, and the world's fastest splicing / heating times.
- Innovative Carrying Case Design
- A detachable built-in working table is inside for quick start of splicing
- Environmental Resistance
- The world's first 6-direction drop proof, dust and water resistant.
- Wide Color LCD Monitor
- High resolution 4.7 inch monitor with better visibility under daylight.
- Powerful Li-ion Battery
- 200 splice and heating cycles per full charge.
- Pre-installed Manual
- Manuals including operation, troubleshooting and others are available through the monitor.
Package:
Type-81C fusion splicer
Battery
Battery Charge Cord
Fiber Cleaver, FC-6S ()
AC Adapter
AC Cord
Spare Electrodes (pair)
Cooling tray
USB Cable
Quick Reference Guide,
Video Instruction Manual
Transit Case with Carrying Strap
Today, explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicer. Fujikura FSM-70S and FSM-80S splicers are the new standard model to cover varied splicing needs in those fields.
Main features:
(Those features maximize productivity and operatability in splicing at the field.)
- Automated Wind-protector / Tube Heater
- Reduced splicing steps, and the world's fastest splicing / heating times.
- Innovative Carrying Case Design
- A detachable built-in working table is inside for quick start of splicing
- Environmental Resistance
- The world's first 6-direction drop proof, dust and water resistant.
- Wide Color LCD Monitor
- High resolution 4.7 inch monitor with better visibility under daylight.
- Powerful Li-ion Battery
- 200 splice and heating cycles per full charge.
- Pre-installed Manual
- Manuals including operation, troubleshooting and others are available through the monitor.
Package:
Type-81C fusion splicer
Battery
Battery Charge Cord
Fiber Cleaver, FC-6S ()
AC Adapter
AC Cord
Spare Electrodes (pair)
Cooling tray
USB Cable
Quick Reference Guide,
Video Instruction Manual
Transit Case with Carrying Strap
$
4,840.00

Fujikura 70S Fusion Splicers
Description :
The Fujikura 70S is a fully ruggedized, core alignment fusion splicer, providing consistent, low loss, splice performance. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. A new programmable “automatic wind protector” closes and begins the splicing process after clamping the fibers in position or pressing the “set” button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibers fast and easy! Similarly, the "clamshell" design of the tube heater clamps the splice splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 14 seconds.
Feature:
- Automated and programmable wind protector
- 14-second automated tube heater
- Fully robust for shock, dust and moisture
- Li-Ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs
- Sheath clamp or fibre holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
The Fujikura 70S is a fully ruggedized, core alignment fusion splicer, providing consistent, low loss, splice performance. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. A new programmable “automatic wind protector” closes and begins the splicing process after clamping the fibers in position or pressing the “set” button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibers fast and easy! Similarly, the "clamshell" design of the tube heater clamps the splice splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 14 seconds.
Feature:
- Automated and programmable wind protector
- 14-second automated tube heater
- Fully robust for shock, dust and moisture
- Li-Ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs
- Sheath clamp or fibre holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
$
4,050.00

Fujikura 70R Fusion Splicers
Description
The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features toincrease splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.
The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features toincrease splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.
$
4,390.00

Fujikura FSM-18R Ribbon Splicer Kit
Includes: CT-30 Cleaver, HJS-02 Hot Jacket Stripper, FH-50-4 Fiber Holders (pair), BTR-08
Battery, DCC-14 Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord, JP-05 Splice
Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick
Reference Guide, Video Instruction Manual, and Transit Case with Carrying Strap
Battery, DCC-14 Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord, JP-05 Splice
Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick
Reference Guide, Video Instruction Manual, and Transit Case with Carrying Strap
$
1,670.00

Fujikura FSM-18S Single Fiber Fusion Splicer
Includes: CT30A Cleaver, ADC-13 AC Adapter, ACC-14 AC Cord, Spare Electrodes (pair), Sheath Clamp, USB Cable, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, JP-05 Splice Sleeve
Cooling Tray, and Transit Case with Carrying Strap.
Cooling Tray, and Transit Case with Carrying Strap.
$
1,450.00

Fujikura FSM-60R Ribbon Splicer Kit
Includes: CT-30 Cleaver, HJS-02 Hot Jacket Stripper, FH-50-12 Fiber Holders (pair),
BTR-08 Battery, DCC-14 Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord,
Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap,
Spare Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case
with Carrying Strap
BTR-08 Battery, DCC-14 Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord,
Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap,
Spare Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case
with Carrying Strap
$
3,990.00